Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving all of Maine

Steel Garage Door Repair in Maine

Dents, rust and bent sections on steel doors repaired or replaced. Typical cost $150-$600.

Steel Garage Door Repair is one of the most common calls we get. A technician will explain what is wrong and what it will cost before starting, and test the door before leaving. Dents, rust and bent sections on steel doors repaired or replaced.

When to call for steel garage door repair

  • Dents from cars, balls or hail
  • Rust spots or rust along the bottom edge
  • Bent or creased sections
  • The door binds where a panel is damaged

Common causes

  • Impact damage on thin-gauge steel
  • Scratches that let moisture reach bare metal
  • Salt and moisture on the bottom panel

Before the technician arrives

  • Small dents that don't cross a hinge line often don't affect operation.
  • Treat rust spots early with a primer and touch-up paint.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

Our steel garage door repair process

  1. Inspect panels, struts and hinges
  2. Repair minor damage or replace damaged sections
  3. Add a reinforcing strut to a weak top section
  4. Rebalance and lubricate
  5. Test for smooth travel

Typical steel garage door repair prices

$150-$600Typical range, parts & labor
1-2 hoursTypical time on site

What moves the price:

  • Door size and weight (single or double, steel or wood)
  • Which parts need replacing and whether they are in stock
  • Spring type and cycle rating
  • Emergency or after-hours timing

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Steel Garage Door Repair in Maine

Snowplows, ice and freeze-thaw cycles crack and dent the lowest panels first in Maine, and moisture that gets behind a damaged bottom section rusts it from the inside.

We cover 134 cities and towns across Maine. Find steel garage door repair in your city:

Steel Garage Door Repair: frequently asked questions

How much does steel garage door repair cost in Maine?

Steel Garage Door Repair typically costs $150-$600 including parts and labor, and usually takes 1-2 hours. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do steel garage door repair the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is steel garage door repair covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Maine or your city requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my garage door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the garage door is near the end of its life, replace it. A garage door typically lasts 15 to 30 years. If several panels are damaged, the door is rusted through or rotted, or parts are discontinued, replacing it is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Maine

Overhead Door Commercial Garage Door Repair

Repairs for commercial sectional, overhead and service doors.

Typical $250-$1,000

Clopay Weather Seal Replacement

Clopay is one of the largest residential garage door makers in North America, with lines such as Classic, Modern Steel, Coachman and Canyon Ridge. The model is usually printed on a label on the door's end stile, which helps us match replacement panels.

Typical $100-$300

Garaga Extension Spring Replacement

Garaga is a Canadian garage door manufacturer based in Quebec.

Typical $150-$350

Martin Door Off-Track Garage Door Repair

Doors that have come off their tracks secured, re-hung and realigned.

Typical $175-$450

Holmes Garage Door Garage Door Track Repair

Bent, loose or misaligned tracks straightened, realigned or replaced.

Typical $150-$400

Martin Door Garage Door Roller Replacement

Worn steel or plastic rollers swapped for quiet, sealed nylon rollers.

Typical $150-$350

Overhead Door Garage Door Sensor Repair

Overhead Door-brand openers come from the same company as Genie, the Overhead Door Corporation.

Typical $100-$250

Rytec High-Speed Door Repair

Rytec specializes in high-speed doors for warehouses, manufacturing and cold storage.

Typical $400-$2,000

Cornell Cookson Commercial Garage Door Repair

Cornell Cookson makes rolling steel service doors, security grilles and rolling fire doors.

Typical $250-$1,000

Richards-Wilcox Torsion Spring Replacement

Torsion springs replaced and wound correctly, with high-cycle upgrades available.

Typical $200-$450

Midland Garage Door Garage Door Panel Replacement

Dented, cracked or rusted sections replaced or repaired to match your door.

Typical $300-$900

Holmes Garage Door Garage Door Roller Replacement

Worn steel or plastic rollers swapped for quiet, sealed nylon rollers.

Typical $150-$350

Garage door stuck, noisy or broken?

Talk to a garage door technician in Maine now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote